The sock machine can be classified according to the for […]
The sock machine can be classified according to the form of a needle bed, the type of needle and the number of syringes (beds). The flat socks machine has a higher machine number, and produces flat-length socks which change the width of each section according to the shape of the feet and legs, and are stitched to form a seamed socks. The machine range of the sock machine is wide. The production of tubular socks is to change the size of the coils of each section, or to use elastic yarns, or to weave the toe, socks and other methods to adapt to the shape of the foot. The toe of the tubular sock blank is closed to form a seamless sock. The flat socks machine has a low production efficiency, and the sock machine is widely used at present. The sock machine structure sock machine is mainly composed of a yarn feeding mechanism, a knitting mechanism, a needle selection mechanism, a control mechanism, a transmission mechanism, a density adjustment mechanism and a pulling mechanism. Some socks machines also have a mouth and a folding mechanism. The flat socks machine still has a transfer mechanism.
The function of the yarn feeding mechanism is to take the yarn out of the bobbin and feed it into the weaving area, which has two types: negative and positive. Negative yarn feeding is caused by tension to pull the yarn out of the bobbin. Although the tensioner and the tension compensating device control the tension and the amount of the yarn, the yarn tension difference is still large. The active yarn is fed by a special device to feed the yarn into the weaving zone at a constant linear velocity with a small difference in yarn tension.
The function of the opening and folding mechanism is to start the mouth when the socks start to weave without coils, and fold the mouth when the socks are woven to a certain length, and fold the single layer of socks into double layers to make the socks have a good Elastic, no curling, usually done with a sock hook. The main function of the transfer mechanism is to move the coil from one needle to the other with a transfer mechanism to change the braid width of the hosiery and shape it.