Product Categories Socks machine classification Sock ma […]
Socks machine classification Sock machine can be classified according to the form of needle bed, type of knitting needle and number of syringes (beds). The flat socks machine has a higher machine number, and produces flat-length socks which change the width of each section according to the shape of the feet and legs, and are stitched to form a seamed socks. The machine range of the sock machine is wide. The production of tubular socks is to change the size of the coils of each section, or to use elastic yarns, or to weave the toe, socks and other methods to adapt to the shape of the foot. The toe of the tubular sock blank is closed to form a seamless sock. The flat socks machine has a low production efficiency, and the sock machine is widely used at present. The sock machine structure sock machine is mainly composed of a yarn feeding mechanism, a knitting mechanism, a needle selection mechanism, a control mechanism, a transmission mechanism, a density adjustment mechanism and a pulling mechanism. Some socks machines also have a mouth and a folding mechanism. The flat socks machine still has a transfer mechanism.
The function of the yarn feeding mechanism is to take the yarn out of the bobbin and feed it into the weaving area, which has two types: negative and positive. Negative yarn feeding is caused by tension to pull the yarn out of the bobbin. Although the tensioner and the tension compensating device control the tension and the amount of the yarn, the yarn tension difference is still large. The active yarn is fed by a special device to feed the yarn into the weaving zone at a constant linear velocity with a small difference in yarn tension.
The function of the weaving mechanism is to weave the yarn into a tubular sock blank or a flat flap by working through the looping mechanism. The knitting machine of the sock machine has knitting needles, sinkers, yarn guides and triangles. The hosiery machine has knitting needles, curved yarn sheets, split yarn sheets, knock-off sheets, yarn guides and tableting. The knitting needle of the sock machine is arranged on the syringe, and the yarn guide is fixed around the barrel to feed the yarn into the knitting area. There are several incoming lines called several roads, generally 1 to 12 roads, the more the number of roads, the higher the productivity. When the cylinder is rotated, the tongue is moved up and down by the action of a triangle, and is woven by the yarn guide. When knitting the heel and the toe, the needle and the needle are engaged by the needle picker and the needle to make the bag shape. The knitting needles of the flat socks machine are fixed on the needle bed and move together with the needle bed. The yarn guide moves along the needle bed to perform the yarn laying, and at the same time, the knitting is performed by the cooperation of the bending piece, the dividing piece and the knocking piece.